Home » How to Choose » 3 In 1 Rework Station For Mobile Phone Repair
How to Choose

3 In 1 Rework Station For Mobile Phone Repair

3 In 1 Rework Station

Hot Air Guns, Soldering Irons and DC Power Supplies are essential tools for electronic maintenance engineers. In today’s blog, we will introduce a 3 in 1 Rework Station for Mobile Phone Repair. It is not only space-saving but also cost-effective. And therefore it is the best partner for repair beginners.

The 3 In 1 Rework Station for Mobile Phone Repair includes a ST-862D Hot Air Station, a ST-965 Soldering Station and an APS15-3A Power Supply. Let’s check their features one by one.

3 In 1 Rework Station For Mobile Phone Repair

3 In 1 Rework Station For Mobile Phone Repair

Power Supply APS15-3A
A DC power supply is used to provide DC power for logic board repairing and booting test. With the built-in current/voltage reading display, it can also be used as a reference for fault-finding.

FEATURES
● Perfect short protection and over-current protection & Overheating Protection.
● Micro-controller Unit features low noise, high stability and low ripple.
● Built-in locking and alarm setting can effectively avoid mistaken operation.

3 In 1 Rework Station For Mobile Phone Repair

3 In 1 Rework Station For Mobile Phone Repair

Soldering Iron ST-965
A soldering iron is used to solder the spare parts on the green-colored PCB (Printed Circuit Board) of mobile phones. These soldered parts may get disconnected, lose contacts with the PCB or simply come out over time. They may also come out due to shock or jerk due to falling down. Therefore you need to solder the parts back again with a soldering iron.

FEATURES
● Temperature calibration & alarm setting.
● LED display for real-time temperature & working status monitoring.
● Auto sleep/switch-off function to highly extend Product life.
● CH 1/2/3 preset temperature for a fast switch.

3 In 1 Rework Station For Mobile Phone Repair

3 In 1 Rework Station For Mobile Phone Repair

Hot Air Gun ST-862D
It is one of the most frequently used tools in mobile phone repair. From replacing charging ports to removing various capacitors and resistors, a hot air gun is a must.

FEATURES
● Conversion between vertical wind and helical wind.
● LED display for real-time temperature & working status monitoring.
● Auto sleep, safe and power saving.
● Precise temperature control, and constant set temperature.

The 3 In 1 Rework Station for Mobile Phone Repair is available now. You can place an order for the whole set or buy a separate one on REWA ONLINE SHOP.
For bulk ordering, please contact REWA Account Manager to get an exclusive discount.

SHARE
RELATED POSTS
iphone-x-aftermarket-screens-full-tests-and -comparisons-banner
iPhone X Aftermarket Screens Full Tests and Comparisons
iPad Touch Screen Assembly – Something You Must Know
iPad Touch Screen Assembly – Something You Must Know
Laser Machine – The Right Choice For Your Repair Shop!
Laser Machine – The Right Choice For Your Repair Shop!

Leave Your Reply

*