Home » NEWS » REWA LAB » Manual OCA Film Laminator – Mold Version – Type 1
REWA LAB

Manual OCA Film Laminator – Mold Version – Type 1

Manual OCA Film Laminator - Mold Version - Type 1

At present, a new type of Manual OCA / POL Film Laminator Machine – Mold Version is available now. This machine is suitable for the lamination of OCA glue and POL. Working with a small vacuum pump, this machine features good stability.

Here is the main specification:
Screen Size: suitable for screen size less than 5.7″
N.W.: 12KG
G.W.: 20KG
Dimension: 30x35x30cm
Working Environment: 20-30℃, Dust-free Room

As well as operation steps:
1. Install the right series mold and connect to vacuum pump
2. Plug in
3. Slip the roller to the left
4. Place the LCD to the mold on the platform below
5. Place the corresponding series OCA to the mold on the up platform
6. Click the button to suck
7. Tear the protector of OCA slowly
8. Turn the up platform and slip the roller to the right, finished

Welcome to watch the operation steps through our YouTube Channel:


You can check our other posts:

SHARE
RELATED POSTS
LCD&OLED Refurbishing Solution
Curved Solution Added – LCD&OLED Refurbishing Solution V4.0
Always damage the FPC connector The flex cable is too flimsy
Always damage the FPC connector? The flex cable is too flimsy?
First-hand Test on New iPhone Aftermarket Screen - Panda Screen
First-hand Test on New iPhone Aftermarket Screen – Panda Screen

Leave Your Reply